MOVI M Series

Preset for controlling MOVI M series gimbals. This profile is compatible with Gunduy Receivers.

Control Functions

Control	Function	Description
PAN	Pan
TLT	Tilt
FOC	Focus	FIZ Motor 1
ZOM	Zoom	FIZ Motor 2
SA	Exponential	Adjust expo on Pan & Tilt between LOW, MEDIUM & HIGH
SB	Mode	Switching Potentiometer Modes (see below)
SC	Record Trigger	Record / Motor Calibation / Controller Calibration
SD	Lock Gimbal	Lock Gimbal for landing
L Trim	Roll Trim / Volume	For trimming out horizon drift / Adjusting Gunduy Volume
R Trim	Pan / Tilt Trim	For trimming out Pan / Tilt drift when joystick centred

To provide access to more functions, the MODE switch is used to switch between 3 different functions for P1 & P2. When switching between modes, the current position of P1 & P2 is saved.

Mode Switch Pos	P1	P2
Low	Zoom Sensitivity	Pan / Tilt Zoom Mix*
Mid	Pan Sensitivity	Tilt Sensitivity
High	IRIS (Motor 3)	AUX (Motor 4)

*The Pan / Tilt Zoom Mix reduces the sensitivity of Pan & Tilt the higher your current zoom level. Adjusting this setting will change how much the zoom setting alters your sensitivity.

What is Expo?

Expo, or Exponential, is a way to describe the response curves available for the Gunduy controller.

Expo reduces the sensitivity of controls close to the centre point. The closer to the center (zero input) your control is, the lower the output level. This is useful when controlling a gimbal, as it allows much more accurate corrections to be made to pan and tilt by the operator. Low Expo corresponds to zero expo, or a linear response.

Outputs

Output Channel	Function
1	Pan
2	Tilt
3	Roll
4	Lock / Mode (called mode in MOVI app)
-
9	Motor 1 / Focus
10	Motor 2 / Zoom
11	Motor 3 / IRIS
12	Motor 4 / AUX
13	REC / Calibrate